10 Best Ford Fusion Splash Guards For 2026: Top Fits, Materials, And Value Picks

Looking for the right protection for your Fusion’s underside or wheel wells? The best options balance fit, durability, and easy installation without adding unnecessary noise or hassle.

This roundup focuses on 10 Ford Fusion splash guards and underbody shields that help block road debris, water, and grime while matching common Fusion model years and trim needs.

Best 10 Ford Fusion Splash Guards Picks for 2026

No-Drill Mud Flap Set – Ford Fusion 2013-2018 Sedan Coverage

If you want Ford Fusion splash guards that focus on everyday road protection, this A-Premium 4-piece set is built for 2013-2018 sedan models. It’s a vehicle-specific fit with no drilling required, and the included hardware makes it a practical choice for drivers who want to block mud, snow, salt, and gravel without a complicated install.

Best For: Fusion sedan owners from 2013-2018 who want a no-drill mud flap kit with included hardware.

Pros:

• Fits Ford Fusion sedan models from 2013-2018
• No drilling required; hardware included for front and rear installation
• PP+TPE composite material is designed for toughness, wear resistance, and anti-aging performance
• Helps shield paint and body panels from chips, scratches, corrosion, and debris

Cons:

• Does not fit models with side skirts or body modifications
• Specific to sedan fitment, so it won’t suit every Fusion configuration

This is a straightforward pick if you want dependable splash protection and an easier DIY setup. The material and included hardware make it a solid all-around option for daily driving conditions.

Driver-Side Replacement Shield – Fusion 2017-2020 Left-Side Undercover

For Ford Fusion splash guards that focus on the underside of the car, this driver-side engine splash shield is a direct replacement for select 2017-2020 Fusion models. It’s made from PP plastic and glass fiber and is positioned as a vehicle-specific part, which makes it a good fit if you’re replacing a damaged left-side panel rather than adding exterior mud flaps.

Best For: Drivers replacing the left-side engine splash shield on compatible Fusion models.

Pros:

• Fits Ford Fusion 2017-2020 for compatible trim levels listed by the seller
• Driver-side / left-side replacement for Partslink FO1228148
• Made from PP plastic and glass fiber for durable, vehicle-specific fitment
• Snap-on installation type is listed in the product details

Cons:

• Only covers the driver-side position
• Fitment is limited to the stated Fusion years and trim compatibility

This panel makes sense when the goal is restoring the factory-style underbody shield on the left side. It’s a replacement part, so it’s more about getting back to proper coverage than upgrading to a larger guard.

Oversized Engine Shield – Fusion 2013-2019 Larger Underbody Guard

If you’re comparing Ford Fusion splash guards for broader underbody coverage, this front engine splash shield is designed for Ford Fusion 2013-2019 and is described as larger, harder, and more durable than the original. It’s meant to protect the engine compartment and surrounding chassis areas from water, mud, gravel, snow, and road debris while also helping reduce airflow turbulence, noise, and vibration.

Best For: Drivers who want a larger under-engine cover with broader protection than the factory piece.

Pros:

• Compatible with Ford Fusion 2013-2019
• Larger-than-original design for wider underbody coverage
• Helps block water, mud, gravel, snow, and debris from entering the engine area
• Includes installation screw and instructions

Cons:

• Not a 1:1 original replacement, so fit may require adjustment
• May need drilling in some model changes, according to the seller
• Professional installation is suggested

This is a good choice if you want a more substantial shield than the stock part and don’t mind a more involved install. Its focus is protection first, with some added benefits for airflow and noise control.

Direct-Fit Under Cover – Fusion 2013-2020 OEM-Style Replacement

This Ford Fusion splash guard option is a direct-fit engine under cover for 2013-2020 Fusion models and 2013-2018 Lincoln MKZ models, with a note that it is not compatible with AWD. It’s designed as a drop-in replacement for FO1228126 / DG9Z6P013E, making it a practical choice when you want factory-style underbody protection without modifying the vehicle.

Best For: Front-wheel-drive Fusion owners needing a direct replacement under cover.

Pros:

• Compatible with Ford Fusion 2013-2020, excluding AWD
• Direct replacement for FO1228126 / DG9Z6P013E
• Made from durable, wear-resistant, impact-resistant material
• Installs with screws and requires no modification

Cons:

• Installation hardware and instructions are not included
• Not compatible with AWD models

If you need a replacement under cover that matches the vehicle-specific shape and mounting style, this one keeps things simple. Just plan on sourcing your own hardware and following a careful install process.

Heavy-Duty Upgrade – Ford Fusion 2013-2020 Manganese Steel Shield

If you want ford fusion splash guards that prioritize underbody protection, this manganese steel engine splash shield is built for the 2013-2020 Fusion range. It replaces the original lower guard and is aimed at keeping mud, stones, sewage, and other road debris away from the engine bay while staying tough on rough roads.

Best For: Drivers who want a stronger-than-stock lower engine shield with maintenance-friendly oil access.

Pros:

• Compatible with Ford Fusion 2013-2020.
• Made from 1.2 manganese steel with a corrosion-resistant sprayed surface.
• Reserved oil holes make oil changes easier without removing the full plate.
• Direct bolt installation supports a straightforward replacement fit.

Cons:

• Designed as an engine guard, so it may be more than you need if you only want simple splash protection.
• Universal-fit wording in the listing is less specific than the vehicle range provided.

This is a practical pick if your priority is durability and long-term underside protection rather than a lightweight replacement. The maintenance cutouts are a useful bonus for routine service.

OE-Style Replacement – Ford Fusion 2013-2018 Front Splash Shield

For ford fusion splash guards focused on a factory-style fix, this PartsFlow front engine splash shield matches the 2013-2018 Fusion and is designed as a direct replacement for the original undercover. It helps protect the oil pan, transmission, and wiring from water, salt, mud, and road debris while also restoring under-engine aerodynamics.

Best For: Fusion owners who want an OE-style replacement shield for 2013-2018 models.

Pros:

• Vehicle-specific fit for 2013-2018 Ford Fusion and Lincoln MKZ.
• Matches OE part numbers and uses original mounting holes.
• High-density polyethylene construction is lightweight and impact-resistant.
• Can help reduce wind noise and dirt buildup under the vehicle.

Cons:

• Mounting clips and screws are not included.
• Only covers model years through 2018, not newer Fusions.

This is a sensible choice if you want a replacement that tracks closely to the original part rather than an upgraded metal shield. Just confirm your reusable hardware before ordering.

Durable Metal Guard – Ford Fusion 2013-2020 Splash Panel Shield

If you are comparing ford fusion splash guards for a full undercar shield upgrade, this manganese steel splash panel is built for the 2013-2020 Fusion lineup. It is designed to block rainwater, dirt, and pollutants while helping protect vulnerable areas from corrosion, rust, and everyday scrapes.

Best For: Drivers who want a no-drill metal splash shield with long-term durability.

Pros:

• Compatible with Ford Fusion 2013-2020.
• Manganese steel construction is aimed at added strength and durability.
• Includes mounting screws and is designed for straightforward no-drill installation.
• Built to resist deformation, impact, and harsh road conditions.

Cons:

• Heavier-duty metal design may be more than needed for shoppers seeking a basic plastic undertray.
• Silver finish may not match every underbody setup.

This version stands out for buyers who want a rugged replacement with simple installation and extra emphasis on longevity. The included screws make it more convenient than shield-only options.

OEM-Style Replacement Pick – Ford Fusion Under Cover Shield

If you need ford fusion splash guards that focus on underbody coverage, this GXARTS engine under cover is a direct replacement-style option for Ford Fusion models from 2013-2019. It is aimed at restoring the lower engine protection that helps keep road debris, mud, and grime away from sensitive components.

Best For: Fusion owners looking for an OEM-style under cover replacement for a damaged original shield.

Pros:

• Compatible with Ford Fusion 2013-2019 and Lincoln MKZ 2013-2018.
• Designed as a replacement for OEM part numbers DG9Z6P013E and FO1228126.
• Intended to help solve damage to the original under cover at a lower cost than shop replacement.
• Quality-inspected product with installation guidance available from the seller.

Cons:

• Fitment notes are mixed in the listing, so verifying your exact vehicle is important.
• No hardware or detailed install contents are clearly specified in the notes.

This is a straightforward pick if your priority is replacing the factory-style lower shield rather than upgrading to a different design. It makes the most sense when you want a direct-fit repair part for a Fusion that has a cracked or missing under cover.

Reinforced Direct-Replacement Option – Reinforced Fusion Engine Shield

For ford fusion splash guards that prioritize tougher underbody protection, this front engine splash shield is built as a direct replacement for Ford Fusion 2013-2019 models. The listing emphasizes thicker material, reserved oil holes, and included screws, making it a practical choice for owners who want a sturdier shield without modifying the car.

Best For: Fusion drivers who want a reinforced replacement shield with hardware included.

Pros:

• Fits Ford Fusion 2013-2019 and also covers select Ford Edge and Lincoln MKZ applications.
• Claims 3x the thickness of the original and uses high-strength PVC-style material.
• Includes screws and installation instructions for direct replacement.
• Reserved oil holes mean no need to remove it for oil changes, per the listing.

Cons:

• Fitment is not universal and is vehicle-specific, so checking trim and year is essential.
• Heavier construction may be more than some buyers need for a basic replacement.

This option stands out if you want a tougher under-engine shield and prefer a package that is closer to install-ready. It is best treated as a rugged aftermarket replacement for drivers focused on durability and convenience.

Direct Bolt-On Replacement – Fusion Under Engine Cover

If you are comparing ford fusion splash guards for a clean, no-fuss replacement, this KUAFU engine splash shield is a direct-fit option for Ford Fusion 2013-2020 models that are not AWD. It is designed to replace a broken or cracked under cover and help keep stones, leaves, sludge, and road debris away from the engine area.

Best For: Non-AWD Fusion owners needing a direct bolt-on under engine cover replacement.

Pros:

• Compatible with Ford Fusion 2013-2020 and Lincoln MKZ 2013-2020, with a noted AWD exclusion.
• Direct bolt-on installation with no drilling or modification required.
• Lightweight composite construction is described as rust-resistant and durable.
• OEM equivalent part numbers DG9Z6P013E and FO1228126 are listed.

Cons:

• Installation hardware is not included, so you must reuse old hardware.
• No installation instructions are included in the package.

This is a sensible replacement choice if you want a basic factory-style shield that installs without extra fabrication. It is especially appealing for owners of non-AWD Fusion models who already have the needed mounting hardware.

How We Picked the Best Ford Fusion Splash Guards

We prioritized fitment range, material quality, install approach, and whether each option is better suited as a wheel-well mud flap or an engine under cover. For Ford Fusion Splash Guards, exact year compatibility matters most, followed by whether the part is a direct replacement or a universal-style accessory.

We also looked for practical features like included hardware, OEM-style mounting, and materials that resist cracking, flexing, or corrosion over time.

Quick Comparison

Broadly, these products fall into two groups: exterior mud flaps that reduce spray and side-panel grime, and engine splash shields that protect the underside of the vehicle. If your main concern is winter slush or roadside debris, mud flaps are the simpler choice. If you need to replace a damaged factory panel, an underbody shield is the better match.

Fit and Coverage

Check exact model years and trim compatibility carefully. Some guards fit only certain Fusion generations, while others also cross-fit Lincoln MKZ or Ford Edge platforms. A closer OEM-style match usually means fewer installation surprises.

Material and Durability

Plastic and composite shields are common because they stay light and install cleanly. Reinforced materials can offer extra rigidity, but the best option is the one that matches your driving conditions and mounting points. For daily drivers, a flexible yet sturdy shield often holds up well.

Key Buying Factors for Ford Fusion Splash Guards

Start with your goal. If you want to reduce mud and spray on paint and rocker panels, choose splash guards or mud flaps. If you’re replacing a missing belly pan or cracked factory cover, choose an engine under cover instead.

Next, confirm whether the part is drill-free or requires hardware and drilling. Drill-free installs are easier, but a more secure mounting system may be worth the extra effort for harsher weather or rougher roads. Also look for clear references to your Fusion’s year range, drivetrain or trim, and whether the part is left, right, front, or full-set coverage.

Finally, think about maintenance. A shield that installs securely and removes easily can make oil changes and inspection work simpler over time.

Who Should Buy Which Ford Fusion Splash Guards?

Drivers who want fast, affordable spray protection should lean toward mud flaps. Owners replacing damaged factory underbody panels should focus on direct-fit engine splash shields. If you drive in snow, slush, gravel, or frequent road debris, prioritize stronger mounting and broader coverage. If you mainly want a cleaner side profile and easier installation, a lighter splash-guard setup is usually enough.