10 Best Ford Taurus SHO Coilovers 2026: Adjustable Ride Height, Comfort, and Handling Picks

Upgrading the suspension on a Taurus SHO can sharpen handling, improve stance, and tailor ride quality to how you drive.

Below, we focus on the best Ford Taurus SHO coilovers and related suspension choices for drivers who want a more controlled, confident setup.

Best 10 Ford Taurus Sho Coilovers Picks for 2026

Budget Adjustable Street Coilovers – Rev9 Hyper-Street ONE for Taurus SHO 2010-12

If you’re shopping for ford taurus sho coilovers on a budget, this Rev9 Hyper-Street ONE kit is aimed at drivers who want adjustable damping and a moderate drop without going ultra-low. It fits 2010-2012 Taurus and Taurus SHO models and uses a mono-tube design with 16 damping levels, making it a practical entry point for street-focused suspension tuning.

Best For: Drivers who want an affordable, adjustable lowering setup for a 2010-2012 Taurus SHO or Taurus.

Pros:

• 16 damping levels for on-car tuning
• Mono-tube shock design with upgraded spring rates
• Front/rear drop range of about 1.25 to 2.25 inches
• Built for handling and ride-quality improvement when lowered

Cons:

• No install instructions included
• Professional installation is recommended
• Not a super-low setup

Overall, this is a straightforward lowering kit for owners who want adjustability and value more than a track-only build. The 16-step damping range gives you room to fine-tune the ride, but it’s best suited to experienced installers who can work without included instructions.

OE-Style Complete Strut Assembly – Monroe Quick-Strut 171615 for Taurus front fit

This Monroe Quick-Strut 171615 is not a coilover kit, but it is a practical suspension replacement for Ford Taurus owners looking for an assembled front strut and spring unit. For drivers focused on restoring factory ride height and reducing install hassle, it offers a complete, vehicle-specific solution rather than an adjustable performance setup.

Best For: Owners of compatible Taurus and Mercury Sable models who want a complete, easy front strut replacement.

Pros:

• Fully assembled unit with no spring compressor needed
• Designed to restore ride height
• Vehicle-specific OE-style fit and function
• Includes preassembled mount, coil spring, and strut

Cons:

• Not an adjustable coilover system
• Front application only
• Compatibility is limited to specific Taurus years

If your goal is to refresh worn suspension with a simple, OE-style part, this Monroe assembly makes sense. It prioritizes fitment, ride restoration, and easier installation over performance adjustability, which is exactly what many daily drivers need.

Fully Adjustable Performance Coilovers – Godspeed MonoSS MSS0142-A for Taurus 2010-12

For shoppers comparing ford taurus sho coilovers for a more performance-oriented setup, the Godspeed MonoSS kit adds independent ride-height and spring-tension adjustment plus 16 click damping. It fits 2010-2012 Ford Taurus models and uses a stainless mono-tube shock with hardware aimed at daily driving and occasional track use.

Best For: Enthusiasts who want height, spring tension, and damping adjustability on a 2010-2012 Taurus.

Pros:

• Independent spring tension and height adjustment
• 16 rebound/damping levels
• 52mm mono-tube stainless steel shocks
• Rebuildable shock absorber design

Cons:

• Installation by experienced professionals is recommended
• Spring rates are firmer than basic comfort-focused options
• Limited to 2010-2012 Taurus applications

This is the most adjustable option in the group for drivers who want to dial in stance and response. The rebuildable design and high-viscosity racing oil point toward a more serious setup, so it suits buyers who value tuning flexibility over simplicity.

Complete OEM Replacement Suspension Set – PM Auto quick complete set for Taurus SHO

If you’re not actually after ford taurus sho coilovers but instead need a complete suspension refresh, this PM Auto set covers the front quick complete struts and rear shocks for 2013-2018 Ford Taurus V6 SHO models. It’s built to OEM quality standards and focuses on safe, simple replacement rather than adjustability.

Best For: 2013-2018 Taurus V6 SHO owners who want a complete replacement suspension bundle.

Pros:

• Set includes front quick complete struts and rear shocks
• No spring compressor needed for the complete strut assemblies
• OEM-quality design for fitment and safety
• Aims to improve steering, handling, braking, and overall safety

Cons:

• Not an adjustable coilover kit
• Fitment is limited to 2013-2018 Taurus V6 SHO models
• Ships in multiple packages and may require fitment checking

For a stock-style suspension overhaul, this bundle is more complete than a coilover search result and better aligned with factory replacement goals. It’s a sensible pick if you want a straightforward, all-in-one solution for the SHO trim.

Lowering Springs Pick – maXpeedingrods Ford Taurus 2010-2019

If you’re shopping for ford taurus sho coilovers-style handling upgrades but want a simpler suspension change, these maXpeedingrods lowering springs are a practical fit for Ford Taurus models from 2010 to 2019. They drop the ride height by about 1.5 inches, which helps lower the center of gravity and improve cornering feel without needing major modifications.

Best For: Drivers who want a moderate drop, better stability, and direct bolt-on installation with OEM or aftermarket shocks.

Pros:

• Fits Ford Taurus 2010-2019.
• SAE 9254 cold-wound steel with anti-corrosion coating.
• Direct bolt-on design works with OEM and aftermarket shocks.
• Tested for 200,000-cycle fatigue and 720-hour salt spray resistance.

Cons:

• Only a lowering spring setup, not a full coilover kit.
• Lowering amount is fixed at 1.5 inches.

For Taurus owners focused on improved handling and a cleaner stance, this is a straightforward suspension upgrade with durability testing and easy compatibility at the forefront.

Complete Suspension Kit – Detroit Axle Taurus SHO 2013-2018

For ford taurus sho coilovers shoppers who actually need a full suspension refresh, this Detroit Axle 8-piece kit covers the front and rear with complete struts, rear shocks, and sway bar end links. It is made for Ford Taurus SHO models from 2013 to 2018, so it is a strong option when you want a bundled replacement kit instead of piecing parts together.

Best For: Owners of Ford Taurus SHO 2013-2018 who want a complete front-and-rear suspension replacement in one package.

Pros:

• Fits Ford Taurus SHO 2013-2018.
• Includes 2 front complete struts with coil springs, 2 rear shock absorbers, and sway bar end links.
• Suspension parts are impact-, wear-, and fatigue-tested.
• Backed by a 10-year warranty.

Cons:

• Bulky 8-piece kit may be more than some buyers need.
• Focused on replacement, not lowering or custom tuning.

This kit makes sense if your SHO needs a full refresh and you prefer a single package with broad coverage, testing, and long warranty support.

Front Strut Assembly – A-Premium Taurus SHO 2013-2018

If you’re comparing ford taurus sho coilovers alternatives and mainly need front-end replacement parts, this A-Premium complete strut assembly is designed for the Ford Taurus SHO 2013-2018 V6 3.5L. It comes as a pair of front struts with coil springs, making it a direct replacement option for restoring ride height, damping response, and handling stability.

Best For: Taurus SHO owners who want a direct-fit front strut and coil spring replacement with OE-style compatibility.

Pros:

• Compatible with Ford Taurus SHO 2013-2018 V6 3.5L.
• Includes a set of two front complete strut assemblies with coil springs.
• Direct replacement with OEM-matched mounting holes.
• Corrosion-resistant cylinder and one-year unlimited-mileage guarantee.

Cons:

• Front-side only, so it does not replace rear suspension parts.
• Sold as a pair, which may be more than a single-corner repair needs.

This is a sensible buy if you want to restore factory-like front suspension behavior on a Taurus SHO without moving into a full custom coilover setup.

Full Suspension Refresh Kit – 8pc Strut & Sway Bar Set

If you’re shopping ford taurus sho coilovers alternatives, this Detroit Axle kit is aimed at 2013-2019 Taurus models that are not SHO. It bundles front struts with coil springs, rear shock absorbers, and front and rear sway bars, so it suits drivers who want a full replacement package rather than piecing together individual parts.

Best For: Taurus owners with non-SHO 3.5L or 2018-2019 non-SHO models who want a complete suspension refresh.

Pros:

• Includes 2 front struts with coil springs, 2 rear shock absorbers, and 4 sway bars
• Complete, ready-to-install assemblies with no additional work or special tool required
• Backed by impact, wear, and fatigue testing
• 10-year warranty for added peace of mind

Cons:

• Not compatible with SHO models
• Bulkier kit than a simple strut-only replacement
• May be more suspension than needed if you’re only replacing one corner

This is a practical choice when you need broad suspension coverage and want OE-style replacement parts in one box. Just make sure your Taurus is excluded from the SHO fitment list before ordering.

SHO Front Right Replacement – Front Right Ready Strut Assembly

For ford taurus sho coilovers-style replacement needs, this Detroit Axle assembly is a front right complete strut for 2013-2019 Taurus SHO models. It comes preassembled with the coil spring, which makes it a straightforward option if you only need to replace the passenger-side front corner.

Best For: SHO owners who need a complete front right strut and spring assembly.

Pros:

• Built specifically for 2013-2019 Taurus SHO fitment
• Complete ready strut with coil spring assembly
• No additional work or special tool required for installation
• Impact, wear, and fatigue tested with a 10-year warranty

Cons:

• Includes only one front right assembly
• Not a full axle set or paired front kit
• Limited to the SHO front right position

This is a good buy if your diagnosis points to a single worn front corner and you want an assembled replacement instead of rebuilding parts separately. It keeps the job simple while matching the SHO-specific application.

SHO Front Pair Upgrade – 2pc Front Ready Struts

If you’re comparing ford taurus sho coilovers options and want a matched front-end replacement, this Detroit Axle 2-piece kit covers both front struts for 2013-2019 Taurus SHO models. Each assembly comes with the coil spring already installed, which is ideal when you want to replace both sides together and keep the front suspension consistent.

Best For: SHO owners replacing both front struts at the same time.

Pros:

• Includes both front struts with coil spring assemblies
• Fits 2013-2019 Ford Taurus SHO applications
• Complete, ready-to-install setup with no special tools required
• Testing for impact, wear, and fatigue plus a 10-year warranty

Cons:

• Front pair only, so it does not cover the rear
• Not intended for non-SHO Taurus models
• More parts than a single-strut replacement if only one side is worn

This pair makes sense when both front corners need attention and you want a matched replacement instead of mixing new and old parts. It is the more complete choice of the two SHO front-end options here.

How We Picked the Best Ford Taurus Sho Coilovers

For this roundup, we prioritized fitment for the Ford Taurus SHO, adjustability, build quality, and value. Because some shoppers want true coilovers while others need complete strut assemblies or lowering springs, we included the most relevant suspension options in one place.

We also considered damping control, spring design, ease of installation, and whether the setup is better suited for daily driving, performance use, or restoring worn suspension.

Quick Comparison

In general, full coilover kits offer the most tuning flexibility, lowering springs provide the simplest budget-friendly drop, and complete strut assemblies are the easiest route for replacing tired factory components. If you want to dial in ride height and firmness, Ford Taurus Sho Coilovers are the most adjustable choice. If you mainly want a refreshed OEM-like ride, complete strut kits are often the better fit.

Key Buying Factors for Ford Taurus Sho Coilovers

Fitment and Model Year

Always confirm whether the kit matches your exact Taurus SHO generation. Many suspension parts differ between 2010-2012 and 2013-2019 models, so year-specific compatibility matters more than brand name alone.

Ride Height and Damping Adjustability

If you care about stance and handling balance, look for adjustable ride height and damping. More adjustment lets you fine-tune daily comfort versus spirited driving, especially if you are lowering the car more than mildly.

Spring Rate and Comfort

Stiffer springs usually improve body control, but they can also increase harshness. Drivers who commute often may prefer a balanced setup, while track-minded owners may accept a firmer ride for better response.

Install Style

Complete strut-and-spring assemblies are generally easier to install than rebuilding parts individually. Coilovers demand more setup, but they give you better control over the final result.

Corrosion Resistance and Hardware

Since these parts sit close to road spray and debris, strong coatings, quality hardware, and durable perches can make a real difference in long-term reliability.

Who Should Buy Which Ford Taurus Sho Coilovers?

If you want maximum adjustability and a more customized driving feel, choose Ford Taurus Sho Coilovers. If you want to restore a worn suspension with minimal hassle, a complete strut kit is usually the smarter route. If your goal is a modest drop on a tighter budget, lowering springs may be enough. Match the setup to your priorities: comfort, handling, appearance, or easy replacement.